Loading

 
         
 
        
         
 
 
 
1
2
3
4
5
6
7
8
 
ÀÏâÀÏíã-10 1x120
ÒÓ Ó 27.3-00214534-092:2016
Single-core power cables with aluminium conductors, XLPE-insulated, aluminium sheathed, with outer shell made of polymer composition, flame retardant
Technical cable requirements correspond to IEC 60502-2
Cables are used for laying:
• in places, where small mechanical impacts on cable are possible, including tensile forces
• in premises, tunnels, ducts, mines, dry soil and outdoor under shelter
• single laying
It is possible to manufacture cables with extruded semiconductor layer along outer sheath.
Order entry example:
ÀÏâÀÏíã-Ï–10 1x120/16 ÒÓ Ó 27.3-00214534-092:2016
An extruded semiconductor layer along outer sheath ensures the correct testing of cable line with sections of underground laying in polymer pipes. To learn more.
It is possible to manufacture cables with an integrated fiber-optic module.
Order entry example:
ÀÏâÀÏíã-10 1x120/16 (ÎÌ) ÒÓ Ó 27.3-00214534-092:2016
In conjunction with the DTS system, the integrated fiber-optic module can act as a distributed cable line temperature sensor. To learn more.
Cables with copper screen can also be manufactured
It is possible to manufacture cable with single-wire conductor.
Order entry example:
ÀÏâÀÏíã-10 1x120/16 (îæê) ÒÓ Ó 27.3-00214534-092:2016
It is possible to manufacture cable with sealed conductor.
Order entry example:
ÀÏâÀÏíã-10 1x120/16 (ã) ÒÓ Ó 27.3-00214534-092:2016
It is possible manufacturing of cables in versions (A) and (B), flame-retardant when laying in bunches
It is possible to supply of three stranded single-core cables.
Order entry example:
3xÀÏâÀÏíã-10 1x120/16 ÒÓ Ó 27.3-00214534-092:2016
Fire safety code in accordance with ÄÑÒÓ 4809:2007: ÏÁ101122000
Products of this mark meet the requirements:
• single wire cable flame retardance
• toxicity class Tk1 of the combustion products of nonmetallic elements (toxicity index from 13 up to 40 g/m3)
• class ÄÒê1 on smoke-forming ability by smouldering of non-metallic elements (coefficient of smoke formation from 50 to 500 m2/kg)
• class ÄÏê2 on smoke-forming ability by combustion (minimum luminous flux more than 60 %)
• corrosive class Êê2 of combustion products of non-metallic elements (the number of halogen hydrides less than 150 mg/g, pH more than 4.3, specific conductivity less than 10 µS/mm)