ПвСПнг-60 1x400 • ТУ У 31.3-00214534-060:2011 • Power cables with copper conductor, XLPE-insulated, lead-sheathed, with outer sheath of polymer composition, flame retardant

ПвСПнг-60 1x400 ТУ У 31.3-00214534-060:2011
Power cables with copper conductor, XLPE-insulated, lead-sheathed, with outer sheath of polymer composition, flame retardant
Technical cable requirements correspond to IEC 60840



Cables are used for laying:
• in places, where small mechanical impacts on cable are possible, including tensile forces
• in premises, tunnels, ducts, mines, dry soil and outdoor under shelter
• single laying



It is possible to manufacture cables with extruded semiconductor layer along outer sheath. Order entry example:
ПвСПнг-П–60 1x400/95 ТУ У 31.3-00214534-060:2011
An extruded semiconductor layer along outer sheath ensures the correct testing of cable line with sections of underground laying in polymer pipes. To learn more.



It is possible to manufacture cables with an integrated fiber-optic module. Order entry example:
ПвСПнг-60 1x400/95 (ОМ) ТУ У 31.3-00214534-060:2011
In conjunction with the DTS system, the integrated fiber-optic module can act as a distributed cable line temperature sensor. To learn more.



It is possible to manufacture cable with sealed conductor. Order entry example:
ПвСПнг-60 1x400/95 (г) ТУ У 31.3-00214534-060:2011



Fire safety code in accordance with ДСТУ 4809:2007: ПБ101122000
Products of this mark meet the requirements:
• single wire cable flame retardance
• toxicity class Tk1 of the combustion products of nonmetallic elements (toxicity index from 13 up to 40 g/m³)
• class ДТк1 on smoke-forming ability by smouldering of non-metallic elements (coefficient of smoke formation from 50 to 500 m²/kg)
• class ДПк2 on smoke-forming ability by combustion (minimum luminous flux more than 60 %)
• corrosive class Кк2 of combustion products of non-metallic elements (the number of halogen hydrides less than 150 mg/g, pH more than 4.3, specific conductivity less than 10 µS/mm)