АПвЭАкВнгд-35 1x240 • ТУ У 31.3-00214534-017-2003 • Single-core power cables with aluminium conductor, flame-retardant, with XLPE, aluminium-wire armoured, with PVC compound outer sheath, with low smoke and gas emission

АПвЭАкВнгд-35 1x240 ТУ У 31.3-00214534-017-2003
Single-core power cables with aluminium conductor, flame-retardant, with XLPE, aluminium-wire armoured, with PVC compound outer sheath, with low smoke and gas emission
Due to non-magnetic armour, cables operate at AC
Technical cable requirements correspond to IEC 60502-2



Cables are used for laying:
• in places, where small mechanical impacts on cable are possible, including tensile forces
• in premises, tunnels, ducts, mines, dry soil and outdoor under shelter
• in bunches
• at sites, where low smoke and gas emission are required (NPP, subway, large industrial facilities, high-rise buildings, etc.)



It is possible to manufacture cables with an integrated fiber-optic module. Order entry example:
АПвЭАкВнгд-35 1x240/25 (ОМ) ТУ У 31.3-00214534-017-2003
In conjunction with the DTS system, the integrated fiber-optic module can act as a distributed cable line temperature sensor. To learn more.



It is possible to manufacture cable with single-wire conductor. Order entry example:
АПвЭАкВнгд-35 1x240/25 (ожк) ТУ У 31.3-00214534-017-2003



It is possible to manufacture cable with sealed conductor. Order entry example:
АПвЭАкВнгд-35 1x240/25 (г) ТУ У 31.3-00214534-017-2003



Fire safety code in accordance with ДСТУ 4809:2007: ПБ122121000
Products of this mark meet the requirements:
• single wire cable flame retardance
• bunched cable flame retardance category A
• toxicity class Tk2 of the combustion products of nonmetallic elements (toxicity index from 40 up to 120 g/m³)
• class ДТк1 on smoke-forming ability by smouldering of non-metallic elements (coefficient of smoke formation from 50 to 500 m²/kg)
• class ДПк2 on smoke-forming ability by combustion (minimum luminous flux more than 60 %)
• corrosive class Кк1 of combustion products of non-metallic elements (the number of halogen hydrides less than 150 mg/g, pH less than 4.3, specific conductivity more than 10 µS/mm)